中文 Collection station Contact public inspection Website map Hello, welcome certification (Shenzhen) Co., Ltd
current location: 主页 > Authentication > EU >

CE

CE "is the abbreviation of French" conform é Europ é ene ", which means" conform to Europe (standard) ". "CE marking", namely CE mark, was formally proposed in the EU product Directive 98 / 68 / EEC signed in 1993. CE mark has become a unified compulsory product certification mark of EU countries. In other words, without the CE mark, you cannot enter the EU market. The application of CE mark on the product means that the manufacturer declares that the product complies with the basic requirements of European laws on health, safety, environmental protection and consumer protection (in practice, these laws are mostly issued in the form of product directives). Products with CE mark can enter the unified market of EU legally and circulate freely in the unified market of EU. The European economic area is the European Union, EFTA member states (except Switzerland). Before the implementation of CE mark, due to the different requirements of EC countries for the import and sale of products, it is easy to form trade barriers between them and hinder the process of economic integration. According to the resolution of new approach directions of technical coordination and standards (85 / C136 / 01) issued by the European Community on May 7, 1985, CE Mark came into being. Is CE compulsory? According to the market access directive 93 / 68 / EEC "CE mark" issued by the EU in 1993, products involving safety, health and environmental protection must comply with the corresponding EU laws (directives), so they must wear CE mark to accept market supervision and management. About 70% of the products in the EU have issued corresponding directives. After the directives come into force, if the products do not wear CE mark, they are not allowed to be sold in the EU market. CE mark is a compulsory certificate to prove that the product conforms to the corresponding laws of the European Union.
 
Certification mark
Since the implementation of CE mark for toy products in Europe in 1990, there has been a strict trend in the implementation. However, when the domestic toy manufacturers print CE mark on their products or packages, they do not make it completely in accordance with the relevant size regulations. We hereby call on the domestic manufacturers to pay attention to CE mark and commodity name on toys The addresses of trademarks, European agents and importers must be pasted or printed on the toy body or other packages in an obvious and easy to read manner. If the toy is too small in size or consists of small parts, relevant information can be printed on the toy package or catalogue. The European market has packaging regulations on the size of the CE mark, in which the height of the CE word is at least 5mm The total length of CE characters shall not exceed 12mm, and the width of CE characters shall not be less than 1 / 5. The thickness shall be at least 1 / 5 of the height (at least 20 × 1 / 5 = 4mm here), and the contents marked shall include warnings and precautions printed in local market characters. The name, trademark and address of the manufacturer, authorized agent and importer shall comply with the CE regulations.
Technical information
Voltage: AC 230V
Frequency: 50Hz
Product range
1 electronic and electrical facilities
2 construction products
3 electrical equipment
4 equipment and protection system used in explosive environment
5 gas equipment
6 glass test tube medical diagnostic apparatus
7 elevator equipment
8 mechanical products
9 medical instruments
10 non automatic lifting equipment
11 personal protection equipment
12 simple pressure vessel
13 satellite ground station equipment
14 communication equipment
15 toy products
 
Among them, LVD: electronic and electrical equipment with AC voltage between 50V and 1000V AC and DC voltage between 75V and 1500V DC. Rtte: wireless products refer to those products that are within the scope of certification
 
Factory inspection
No factory inspection required
 
Certification notice
Radio product application for CE requires application for rtte, which is divided into three parts: EMC, LVD and RF. RF has different standards according to different product frequencies. According to different needs of customers, it can apply for rtte with Nb number. When applying for rtte with Nb number, there should be no more than two models, and the same technical data as FCC ID requirements should be provided. Ordinary products must now use case by case to send NBCE The method of processing is to provide product specification format to confirm whether it can be done one by one, and confirm that the full name of price rtte instruction is wireless communication instruction one by one, so this instruction is applicable to wireless products, communication products, and wired communication products. When doing this instruction, LVD can be done, EMC can. When doing en55020, it is necessary to confirm whether S1-S4 anti-interference test can be done for customers, If it is done, the quotation needs to increase the EMC test cost by 8000.00 yuan. If it is not stated, CE is not the product quality certificate
The resolution on new methods of technical coordination and standards has a specific meaning for the purpose of formulating and implementing the directive, that is, it is only limited to the basic requirements of products that do not endanger the safety of human beings, animals and goods, rather than the general quality requirements. Therefore, the exact meaning is: CE mark is a safety conformity mark rather than a quality conformity mark.
 
EU Member States: Austria, Latvia, Belgium, Lithuania, Bulgaria (joined on January 1, 2007), Luxembourg, Cyprus, Malta, Czech Republic, Poland, Denmark, Portugal, Estonia, Romania (joined on January 1, 2007), Finland, Slovakia, France, Slovenia, Germany, Spain, Greece, Sweden, Hungary, Netherlands, Ireland, UK Italy
 
Certification data and process
 
Data preparation:
1. Product instructions.
2. Safety design documents
3. product technical conditions.
4. Schematic diagram of product circuit.
5. Product circuit diagram.
6. List of key components or raw materials (please select products with European certification mark).
8. Other required information.
9. Application form
Note:
1) Unless otherwise specified, please provide the above information in English.
2) For multiple models of products

Authenticationservice project

National Service Hotline400-1668-320

Contact

Business consulting:400-1668-320

after-sale service:0755-23720636

Enterprise mailbox:info@cmczj-lab.com

Shenzhen Headquarters:1 / F, building B, kaihuimao Industrial Park, Liyuan Road, Heping community, Fuhai street, Bao'an District, Shenzhen